Maurice Lacroix Le Chronographe Squelette LE
This 45mm chronograph is equipped with Maurice Lacroix’s manufacture movement, caliber ML 106-7. The hand-wound 16.5 ligne (36.6mm) movement is developed, manufactured and assembled in-house. Offering classic column wheel design, 1/5 second accuracy and a 60 minute counter, the movement also featured a unique, patent-pending system that reduces the effects of impacts during the interlocking and releasing phases. Chronograph seconds are indicated by a central hand with the 60-minute chronograph counter at 3 o'clock and small seconds at 9 o’clock. The movement is adjusted in 5 positions and runs in 22 jewels at 18,000 vph (2.5 Hz) with a power reserve of 42 hours. The bridges are hand-decorated. The steel case combines polished sunray, circular, and vertical-brushed surfaces. The domed sapphire crystal is anti-reflective coated on both sides. The crown screws down, and the watch is water resistant to 100 meters. The dial is sapphire-crystal with metal-coated treatment and it

About to take the plunge on a Diver
Hi guys,Long time forum reader but wanted to jump in with my first post. I am narrowing in on a long considered purchase of a ROO Diver 15710 with black dial. For me the open case back is the biggest factor vs the 15703 to see the amazing workmanship of the movement, especially as this will be my first 'holy trinity' piece. When I first began scoping out AP I was set on the 15400, but even after trying all three dial colours it never grabbed me the same way as when I first tried on the diver - I almost bought it there and then on the spot !One thing though that I am intrigued about is the price difference (when at full retail at any rate) between the diver and the 15400. In my book the diver, absent the virtually handmade bracelet, which clearly adds to the overall cost of manufacture should be positioned at a lower cost than the diver with a rubber strap. This is further compounded when the difference in dial manufacture method is taken into account, considering the presumed cost to m

Will sharp edges last?
Gents, wearing my 15202 then other night I thought of a question. I had it on under a log sleeve shirt and leather jacket and obviously the fabric rubs on the watch. Over the long term, will this dull he sharp case edges? Can anything associated with normal wear dull the edges. What about on PM?

Commemorating a special event!
42 years ago today, two Americans landed on the moon wearing the same model Speedmaster Professional (105.012) that I am wearing today:A marvelous accomplishment, Neil and Buzz!Fr. John?

Help wanted - Is this Rolex GMT Pepsi unpolished?
Hi,Do you think that this rolex gmt pepsi is unpolished?Many thanks for you input and help!