Thus, in my journey to find a suitable Omega to my other Omega bracelets Chameleon
Thus, in my journey to find a suitable Omega to my other Omega bracelets Chameleon, I tried to find one on ebay, because it seems to have the most variety. First, research began with the search for the terms?Omega loop? which proved enormous quantities of loops that?good Omega? watches, many of which are just regular loops. I have reduced my research to?Chameleon Omega loop? and this helped greatly. In the search for a direct replacement, I couldn't find everything that seemed almost identical to the Omega Chameleon I have currently, so I started to read descriptions and deciphering of the photographs in an attempt to identify those who may be aesthetically different but functionally identical. I finally found one where the image might suggest that it works the same way but didnt' indicate enough that it could be determined in both cases. It is our friend wholesaleoutlet990.

AP ROO 25770st vs AP ROO 25721st
Which one would you choose and why?Is the 25770st at a disadvantage, since you can't put a bracelet on it?

How do they do it?
I know that many Breitlings are thick. However, there are quite a few, that have a really slim profile. And I like it. It allows for a larger watch to look and wear quite small, but with great visibility and wrist presence. But curious how they do it. The watch I am wearing today has a GMT, Date and 300M water rating. Everything other brand, from what I can tell, says the thickness of the case is due to the thickness of the movement and the requirements based on depth rating. For example the Submariner is slightly thicker than the 116710 GMT because of the water rating. Curious if anyone has any knowledge on this. Thanks,

Picking the right one can be difficult...
...so it��s good if you don��t have to decide for one.

5980 chrono hand resets to 59
Looking to get a pre-loved 5980 from a friend but noticed this when i was inspecting the watch. When I reset the chrono hand of the 5980, it resets to 59 instead of 0. I have to double click the button ( so essentially its holding at 0 with 1 second elapsed on the timer ) to engage the chrono function so it will align to 0. Is it okay if i leave it at 0 with that method or better if the chrono function is reset Thanks!